INSTALLATION INSTRUCTIONS
|
|
|
 |
STEP 1
Clean the surface with sugar soap to remove all grease and other residue.
Make sure the surface is completely clean and dry before commencing the tiling.
Freshly painted walls should be allowed to dry for 4-6 weeks after painting before
tiling. |
| |
|
 |
STEP 2
Start by measuring the surface for the first tile and marking for exact placement.
Use a level to manage correct positioning. |
| |
|
 |
STEP 3
Trim the starting tile to size. |
| |
|
 |
STEP 4
For oblong shaped tiles cut off the protruding tongues of the starting tile. |
| |
|
 |
STEP 5
Peel away backing about one third of the way and fold it back. This makes laying the tiles easier.
|
| |
|
 |
STEP 6
Place the first tile in position without pressing too heavily until you are happy with the positioning.
Then peel off the remaining two thirds of the backing as you fix the whole tile.
PLEASE NOTE:
Never install the tiles close to extreme heat or flames.
STICK-A-TILE must not be installed behind a cooktop without a protective back plate. |
| |
|
